propane gas explosion flammable

Explosions Caused by Propane and Natural Gas: What You Should Know

Natural and propane gas explosion can occur for any number of different reasons. Understanding the varying similarities and differences among the gases themselves is what we’ll explore in this article, as well as some of the reasons why an explosion may occur.

Natural gas and propane gas are most commonly used as fuel types nowadays. Propane gas (along with butane, ethane, and pentanes) is actually a byproduct of natural gas processing. It is produced when raw natural gas goes through acid gas removal, dehydration, mercury removal, and other procedures to convert it into sales gas, which is what end users receive.

 

Natural Gas and Propane Gas Similarities

In terms of physical properties, natural gas and propane gas have similar characteristics. As the National Association of Fire Investigators notes, both of these gases have almost the same energy densities per unit mass. They also have the same level of laminar premixed flame burning velocities.

 

The two gases are similar in that they’re widely used among various industries.  Natural gas is used as cooking and heating fuel in homes and is a part of the manufacturing process for steel, glass, paint, fabrics, plastics, and many other products. It’s also used to produce hydrogen (for hydrogen-powered vehicles and other applications) and ammonia (for fertilizers). Propane, meanwhile, is used in portable stoves and barbecues as well as heating systems for campers and RVs. It’s also used in portable refrigeration and as motor fuel, and it’s popular among industries that require require portable heat.

 

Natural Gas and Propane Gas Differences

While these gases have similar energy densities per unit mass, they have different relative densities. Natural gas is lighter than air, whereas propane gas is heavier than air. This means that, when there is a leak, natural gas rises to the ceiling while propane accumulates at the lowest parts of the structure, such as the basement and even sewer drains.

 

Because of its higher density, propane gas can be easily placed in containers and stored onsite on the end user’s premises. This is why it’s popular among those who require portable fuel sources for cooking, heating, and refrigeration. Natural gas, meanwhile, is difficult to store and is usually only available through a connection to a pipeline network.

 

While propane gas offers more convenience to users, it also exposes them to propane gas explosion burns and other injuries. Studies have shown that, while methane (the major component of natural gas) has low reactivity levels, propane is considered to have “medium” reactivity and is therefore more prone to exploding. Researchers have also discovered that propane has twice the maximum rate of pressure rise of methane. This means it results to a higher explosion severity, causing serious injuries on burn victims and even leading to high death rates.

 

Propane gas explosion severity is illustrated in the explosion that took place at the Herrig Brothers Feather Creek Farm in Iowa on April 1998. The farm had a tank that contained 18,000 gallons on propane, and above-ground pipes leading from the tank were damaged when an all-terrain vehicle crashed into them. The damaged pipes allowed propane to leak, which eventually resulted into a fire that engulfed the tank. The heat from the fire caused temperatures to rise within the tank, resulting into an explosion that was termed a Boiling Liquid Expanding Vapor Explosion (BLEVE). Several frefighters who had rushed to the scene became burn victims, and two of them were even killed by tank fragments.

 

Contact Us Now

If you have incurred burns from a propane gas explosion at work or any other place, you deserve to receive the right amount of compensation for the trauma you’ve suffered. Call McEwen Law Firm to get the help of experienced attorneys who specialize in burn injuries.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

construction explosion burns

Working in Construction? These Common Tasks Can Put You at Risk for Burn Accidents

When people think of construction accidents, the first thing that usually comes to their minds is falling from height. This isn’t really surprising since many construction projects nowadays are focused on skyscrapers and other high-rise structures. However, it’s important to note that getting injured from falls is not the only thing that workers should be worried about — they’re also at risk for construction explosion burns.

 

These burn injuries can be caused by several factors, and they usually take place when employees work on common but dangerous tasks. We’ve listed some of them below.

 

Welding

Welding usually involves an open flame or an open electrical arc and creates sparks and high amounts of heat — both of which can cause fires and possible construction explosion burns if they come in contact with the right materials. Because of this, it’s important to bring the object to be welded to a place without any fire hazards. If this is not possible, workers and employers should remove all movable fire hazards from the area where welding would take place. Shields should be used to cover fire hazards that could not be moved and confine the heat and sparks within a small area.

 

Welding is one of the most dangerous construction jobs and also one of the biggest contributors to burn injuries on construction sites. In India, for example, a welder who was working inside a vertical tunnel that was eight meters underground died when a fire broke out in the tunnel. The cause of the fire was not really clear, although his fellow workers blamed the construction company for not providing them with safety equipment. The welder suffered from serious burn injuries that covered 90 percent of his body and led to his immediate death.

 

Electrical work

Construction companies usually have their own electricians or hire electrical subcontractors, who are responsible for installing the structure’s electrical system and ensuring they integrate well with the overall design. Because of the nature of their job, these workers are constantly at risk of getting electrocuted and incurring electrical burns.

 

However, electricians are not the only ones who can get burned. Construction workers who work at height are exposed to high-voltage power lines, and these can cause electrocution and electrical burns when workers’ torsos or limbs come into contact with them. Burns and electrocution can also happen when workers indirectly touch the wires through ladders and other tall objects.

 

Workers don’t even need to touch electrical wires, tools, and equipment to incur burns. Because of their electrical nature, these items can let out electrical charges, which can cause electric shocks and ignite flammable materials nearby. These, in turn, can lead to electrical burns and thermal burns, respectively.

 

Other Situations

Even when construction workers are not doing anything, they are still exposed to accidents and burns simply because they’re at a construction site. This is particularly true if the site is not well-maintained and/or the managers and owners don’t adhere to safety policies.

 

Most construction sites have glues, solvents, paint, paint thinner, wet cement, cleaning supplies, and other things that are made of strong chemicals, and they can cause workers to develop chemical burns. Many of these substances are also flammable, and they can cause fires and explosions and lead to serious construction explosion burns when exposed to heat and electrical sparks.

 

Arc flashes are another factor that can cause burn injuries. They are powerful currents that come from power lines as well as power tools, generators, and other machines, and they increase the temperature in the air as they travel through it. Arc flashes can heat air up to 36,000 degrees Fahrenheit and therefore can cause deadly burns to anyone in the vicinity in just a few seconds.

 

If you have incurred construction explosion burns, contact McEwen Law Firm and let us help you get the compensation you deserve.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

electrical burn injury

Here’s What You Must Know About Electrical Burns and Accident Prevention

An electrical burn injury can occur from exposure to high amounts of electricity through contact with exposed wires, faulty appliances, or electrical sockets. These burns can also result from being struck by lightning, although this happens in very rare instances.

 

Electrical burns usually happen when people fail to follow safety precautions, mainly because they’re not aware of the dangers that they’re exposed to in certain conditions. This is especially true among homeowners and landlords who conduct home improvements as well as workers whose jobs involve being in close range with electrical products.

 

Safety Laws

Electrical burns don’t only cause serious injuries but can also take lives. Because of this, many organizations have come up with safety laws to prevent accidents from taking place and keep people away from electrical burn injury.

 

The Consumer Product Safety Commission, for example, requires antenna manufacturers and importers to put warning labels on their products and include installation instructions. This comes from the fact that outdoor antennas, particularly those used for televisions and CB base stations, have caused numerous electrical accidents over the years.

 

The main cause of these accidents is when people fail to properly judge the distance between the antenna and the power lines in the area. This means that, when the consumer puts up the antenna on their roof or takes it down, it inadvertently touches the power line and allows electrical current to reach the person holding the antenna. With proper instruction and warning labels, consumers can become alerted to this danger and take precautions when installing or removing outdoor antennas.

 

The same thing happens with metal ladders when they’re used for outdoor jobs — people either misjudge the distance between the ladder and the surrounding power lines, or they properly gauge the distance but lose control of the heavy ladder. Both of these can result in the ladder touching a power line and causing electrocution and electrical burns.

 

This has lead the National Institute for Occupational Safety and Health to require companies to comply with the regulations set by the Occupational Safety and Health Association. These regulations prohibit employers and their staff from using portable metal ladders when they’re doing electrical work or if they’re working in an area where the ladders can easily get in contact with electrical conductors. Most ladders nowadays also have the American National Standards Institute warning sticker, which describes the electrical hazard they bring, the possible results of ignoring this warning, and the ways to avoid or minimize the hazard.

 

Preventing Electrical Accidents

Of course, safety rules and regulations don’t completely protect people from electrical burn injury, so practical steps should still be taken to prevent accidents.

 

Employers, for example, should invest in ladders with fiberglass links, which isolate electrical current and prevent them from reaching the person holding or standing on the ladder. It’s also helpful to wrap Teflon or any other nonconducting and insulating material around the top half of extension ladders.

 

Employers should also require their workers to wear special protective equipment  when doing electrical jobs or working in areas near power lines. These include including helmets, rubber insulating gloves and sleeves, and goggles that are specially designed to protect the corneal epithelium in the eyes. Workers should also do their part by complying with this requirement and wearing the prescribed protective apparel when needed.

 

Get the Compensation You Deserve

If you have incurred an electrical burn injury at work, you can obtain financial compensation for the physical, mental, and emotional trauma you’ve gone through. Call McEwen Law Firm to know how we can help you.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

burn-victim

What Can You Do to Help Burn Victims Heal?

Burn victims must be taken to the hospital so they can receive the medical care they need. However, its’ important to note that burn victim recovery isn’t just about getting medications, surgery, and other treatments. It’s also about having a solid network of family and friends who help the patient with their needs and cheer them up as they go through the road to recovery.

 

If you have a loved one who has suffered from burns, you can help them heal physically, mentally, and emotionally by taking these steps:

 

Visit them at the hospital

If you have the time, you’ll want to visit your loved one while they’re still in the hospital. It’s best to give them a couple of gifts that will help them pass the time while they’re recuperating, such as a brand-new journal, art supplies, books, audiobooks, magazines, and video games. Motivational posters featuring their favorite author or celebrity can also help. If the patient is already allowed oral food intake, bring them their favorite snacks or dishes.

 

One thing you should be careful about is bringing flowers. Many burn patients are highly susceptible to infections since their skin is not intact, which means they should be kept away from items that harbor bacteria. Fresh flowers unfortunately fall under this category. If you really want to surprise your loved one with fresh flowers, contact the hospital or the patient’s doctor, and ask if this is allowed. Otherwise, it’s safer to bring artificial flowers.

 

Provide emotional support

Some burn patients like to talk about the incident, while others want to forget about it. Take cues from your loved one and avoid talking about the incident if they don’t want to. If they’d like to talk, listen to them and ask thoughtful questions that help express their emotions without upsetting them.

 

Offer help with daily tasks

Receiving treatment in the hospital is just the first part of the battle for many burn patients. Once they get home, they’ll need help to do chores and other activities since their energy levels and range of movement are not the same as before. During this stage, the best thing you can do is to offer to help with day-to-day tasks. If you love to cook, for example, offer to make freezable meals for the family so they can enjoy home-cooked food without much effort.

 

Connect them with a trusted attorney

Many burn patients receive their injuries in incidents where another party was at fault. If this was what happened to your friend or family member, you’ll want to connect them with a legal expert like McEwen Law Firm. We have years of experience in helping burn victims build a solid case and obtain the financial compensation that they deserve. This amount can then be used for burn victim recovery treatments as well as other things that will help them get their life back on track.

 

 

The road to burn victim recovery is by no means an easy one. However, by being there for a loved one who has experienced burn injuries, you can make things less difficult and show them that there’s hope for the future.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

burn accident treatment

Burns: Degrees, Causes, and Treatment

Burns are some of the worst injuries that people can experience. This comes from the fact that, aside from causing intense amounts of pain, burns can also damage the skin and affect the victim’s appearance. In serious cases, they can cause health complications including infections, hypovolemia (low blood volume), and hypovolemic shock. Burn accident treatment becomes paramount depending on the severity of the burn that occurs.

 

Types and Causes

Burns can be categorized according to their causes. Here are some of types of burns:

 

  • Thermal burns — occur when hot objects or surfaces as well as scalding liquids come into contact with the skin.

 

  • Electrical burns — more commonly caused by exposure to electrical sources (e.g. touching live wires) but can also be caused by lightning.

 

  • Chemical burns — happen when the skin is exposed to household or industrial chemicals (usually cleaning agents), which can be solids, liquids, or gases.

 

It’s important to note that many burns can be a combination of different burn types. Vehicle explosion burns, for example, can be both thermal burns (e.g. when the skin touches the hot metal of the car) and chemical burns (when the skin is exposed to the car’s fuel).

 

Degrees

Burns can also be classified according to their severity. These classifications are first-degree, second-degree, and third-degree burns.

 

First-degree burns, also called superficial burns, affect the outer layer of the skin, aka the epidermis. They cause redness and minimal inflammation on the affected site as well as pain. They usually heal without leaving any scars, although the healing process turns the skin dry and peeling. Despite being the least severe of all burn types, first-degree burns can still be dangerous if they affect a large part of the body and/or if they occur on the face or on a major joint (like the knees or shoulders).

 

Second-degree burns are also called partial thickness burns and affect both the epidermis and the layer of skin beneath it, which is the dermis. Aside from pain, swelling, and redness, these burns also lead to the formation of blisters on the affected site. These blisters can pop open later on, which puts them at risk of getting infected. They usually heal within three weeks or so; most of them might leave pigment changes on the affected area but usually won’t leave scars.

 

Third-degree burns, aka full-thickness burns, affect the epidermis, the dermis, and deeper tissues. Depending on what caused the burn, the affected area can feature charred skin, waxy and white skin, or raised and leathery skin. Some third-degree burns damage the nerves on the site and therefore don’t cause pain, but they must be treated ASAP since they can cause severe scarring and skin contracture. These can limit the patient’s range of motion and change the appearance of his skin and body.

 

Treatment

The type of burn accident treatment needed depends on the cause of the burn as well as its severity. First-degree and second-degree burns, for instance, require antibiotic ointment or cream to prevent infections as well as oral pain relievers to minimize discomfort. Third-degree burns, on the other hand, require an IV to replace lost fluids and intravenous antibiotics to prevent infections. Second-degree and third-degree burns that extensively damage the skin, underlying tissues, bones, and organs may require surgery (including skin grafting), physical therapy, and other rehabilitation treatments.

 

 

If you’ve obtained burns and another party was at fault, contact highly competent attorneys like McEwen Law Firm. We have years of experience in helping clients with burn injuries and will help you obtain financial compensation to continue your burn accident treatment and get back to good health.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

vehicle explosion burns

Burned in a Car Accident? Here’s Why You Should Hire a Competent Attorney

When people think of automobile accidents, they usually picture victims having broken bones as well as cuts and wounds from broken glass. What they usually don’t envision are victims who endure vehicle explosion burns.

 

The problem is that vehicle explosion burns are much more common than people think. From 2003 to 2007, an annual average of 287,000 vehicle fires were recorded in the United States. This resulted in an annual average of 480 deaths and 1,525 injuries among civilians as well as direct property damage worth $1.3 billion. This was reduced to 174,000 vehicle fires in 2015, although these incidents still caused 445 deaths and 1,550 injuries on that year.

 

Getting burned in an automobile accident is difficult and harrowing. If you find you or your loved one has been through this experience, you’ll need to hire a skillful and experienced attorney who specializes in vehicle explosion burns. By getting the help of this expert, you’ll have someone who’ll assist you with the following:

 

Determine what happened

Because of their experience, competent attorneys are familiar with the reasons behind vehicle fires, which include collisions between two or more vehicles, defective car parts, or leaking fuel tanks. They can also hire experts who will help determine exactly what caused the fire and/or explosion.

 

Build your case

Once the cause of the incident has been established, your attorney will build a solid, persuasive case showing that you deserve financial compensation. He will hire vehicle experts and accident reconstruction engineers to prove that the other party is at fault. (The other party can be the car manufacturer or the other motorists involved in the accident.) He will also work with your healthcare team to obtain documents about your injuries and show the extent of bodily harm you experienced, and he can hire medical experts to explain the future treatments you need (as well as their costs) to get better.

 

Obtain compensation that’s rightfully yours

Your attorney’s efforts will help prove that you deserve to be compensated for the injuries you’ve sustained during the vehicle explosion. This compensation will be paid by the motorist who was at fault or the company who manufactured the faulty car. With this amount, you’ll be able to focus on your getting better and regaining good health instead of worrying about where you’ll get funds for your treatments. You’ll also be able to pay for any future treatments and therapies you might need to restore your range of motion, remove scars and burn marks, and achieve other goals. The money from your compensation can also be used to replace the earnings that you’ve lost due to missed work.

 

Of course, no financial compensation can replace the life that a loved one has lost due to vehicle explosions. However, the compensation that you’ll get will support you and your family as you grieve, and it will help you rebuild your life as you move forward.

 

Contact an Experienced Attorney Today

If you or your family member is a victim of a vehicle explosion, get in touch with McEwen Law Firm. We represent clients who have incurred vehicle explosion burns and will help you get the compensation you rightfully deserve.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

propane gas explosion burns

Propane Gas Explosion Burns

Propane is relatively safe but, just like many types of flammable gas, it can be dangerous when the equipment involved is old and/or faulty or if the system is not properly installed. This is also the case if the user doesn’t follow instructions and abuses or misuses the equipment. In these cases, it’s highly likely that an accident causing propane gas explosion burns may occur.

 

Propane is a byproduct of petroleum refining and natural gas process that appears as a colorless, odorless gas in room temperature but can be compressed into a liquid. Aside from being easy to transport, propane has a low boiling point and can therefore vaporize once it’s released from its container, which means users don’t need a carburetor or any other vaporizing device.

 

Because of these properties, propane is used in a wide range of residential, commercial, and industrial applications. These include laundry dryers, barbecue grills, central heating for homes, and portable stoves and refrigerators for campers as well as vehicles and heavy equipment like taxis, buses, and forklifts.

 

Cases of Propane Gas Explosions

Over the years, there have been many explosions that were caused by propane gas problems. On December 1, 2016, a barbecue trailer that was parked inside a warehouse in Stafford, Texas, suffered from an explosion. Investigators found out that the explosion was caused by a propane tank inside the trailer and that the tank was ignited by the electricity that had powered a refrigerator located inside the same trailer.

 

A few days later, on December 12, a propane-related explosion destroyed a house in Middletown, New York. The residents had contacted a private propane supplier due to a smell that they had noticed in the home, and the supplier was due to investigate the issue on the day the explosion happened.

 

Burns Caused by Propane Gas Explosions

Aside from damaging properties, propane gas explosions can also cause burns. The explosion itself can damage skin and underlying tissue, and the resulting fire from the explosion can also cause burns on the victim. This two-fold approach is one of the reasons why propane gas explosions are often deadly and can result to serious burns and other injuries.

 

Just like with other types of burns, propane gas explosion burns can result to superficial (first-degree) burns, partial-thickness (second-degree) burns, and full-thickness (third-degree) burns. Fourth-degree burns can even occur if the burn damaged muscle, bone, and other deep structures, which can lead to renal failure.

 

The severity of propane gas explosion burns can make it difficult for victims to regain good health. Depending on the type, location, and degree of the burn, they can take weeks, months, or even years to recover from their injuries and get back up on their feet. This won’t only put the victims and their loved ones through mental and emotional trauma but will also expose them to financial issues.

 

Find a Reputable Burns Lawyer Today

If you have suffered from propane gas explosion burns due to defective equipment or improperly installed systems, get in touch with McEwen Law Firm. We have a team of expert burn lawyers who will work with you to ensure that you will get the compensation you rightfully deserve and that you’ll have the funds you need to get on the road to recovery. Call us today to schedule a free consultation and evaluation for your case.

 

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

electrical burn accident

Electrical Burn Accident

An electrical burn accident can take place when a person gets exposed to electrical currents (such as those from a household appliance, electrical outlet, or power line) at home, at the workplace, or any other place. They can also happen to someone who gets struck by lightning or hit by a stun gun. Electrical burns are dangerous since they don’t only affect the skin; they can also have an impact on internal organs because of the current that goes through the body.

 

Factors That Affect Electrical Burns

The severity of electrical burns depend on several factors. One of these is the voltage of the electrical current that passes through the victim’s body. The term “low voltage” covers 380 volts and below, while the term “high voltage” refers to electric voltage higher than 380 volts.

 

Another factor is the type of material through which the electrical current passes through. If it passes through conductors like copper, silver, and other types of metal, it can easily reach the person on the other end since these facilitate the effortless flow of electricity through them. If the current passes through insulators such as glass, porcelain, or plastic, it won’t easily reach the person since these materials restrict the flow of electrons.

 

The resistance found in the victim’s body is another important factor. A normal dry hand, for instance, has an average resistance of 5000 ohms/cm2. This increases to around 1,000,000 ohms/cm2 if the person has callused skin on his palm, and it decreases to around 1,000 ohms/cm2 if his hand is wet.

 

Other factors that affect electrical burns include the type and amount of current involved, the area of the body where it comes into contact, and the length of time of the contact.

 

Signs and Symptoms

A low-voltage electrical burn accident is most common with children five years old and below. Kids often have the tendency to grab electrical wires and cords and even put these in their mouths. Because of this, many cases of low-voltage electrical burns affect the hands and mouths of the patients. Blackened tissue along with redness, swelling, and irritation can be observed on burned hands, while burns in the oral cavity result to a grayish-white burn.

 

High-voltage electrical burns can be divided into two categories: electrical arc burns and electrical current burns. Both produce charred entry wounds with a depressed center and leather-like appearance as well as “exploding” exit wounds. Severe tissue damage can also occur.

 

In both cases, weakness, dizziness, headaches, shortness of breath, abnormal heart rate, balance issues, and pain can accompany the burns. Seizures may also take place.

 

Complications

The problem with electrical burns is that they don’t just result to burned skin and tissues. In many cases, they can also lead to complications, such as the development of gangrene in the affected area. Other complications may involve the joints, eyes, lungs, cardiovascular system, and neurologic system.

 

Call a Burn Injury Lawyer

If you have been involved in an electrical burn accident, the best thing to do is to hire a burn injury lawyer who will help you file a claim against the party who was at fault. If you’re in the Minnesota area, contact us here at McEwen Law Firm.

 

Our team of burn injury lawyers have extensive experience in representing clients that have had an electrical burn accident. We will work to help you file your claim and get the compensation that’s rightfully yours. We work on a contingency, which means we will not charge you any fee until we can successfully get the compensation you deserve.

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.

chemical burn accident

Chemical Burn Accident

A chemical burn accident can occur when you’re exposed to substances that are harsh enough to irritate or damage tissues. These include strong acids or bases (alkalines) such as: ammonia, car battery acid, teeth whitening products, and denture cleaners, as well as any chemical that’s used in manufacturing and other industries like lye, lime, and silver nitrate.

 

The most commons signs of these burns include a number of symptoms. They can include blackened skin as well as pain, redness, irritation, numbness, or a burning sensation at the affected area. The type and severity of symptoms of chemical burns, as well as the treatment required for them, depend on the type of chemical you were exposed to, its amount and concentration, the location of the burn, and many other factors.

 

Types of Chemical Burns

Chemical burns can be categorized according to the extent of the injury that the victim has incurred. A superficial burn (also called first-degree burn) affects only the epidermis, which is the topmost layer of the skin. A partial thickness injury (also called second-degree burn) affects the epidermis as well as the dermis, which is the second layer of the skin. A full thickness injury (also called third-degree burn) affects the subcutaneous tissue, which is the third layer of skin, along with the dermis and epidermis.

 

Who’s at Risk?

Harsh chemicals can be found almost anywhere, a chemical burn accident can happen at home, at work, or at school. In residential areas, older adults, little children, and people with physical disabilities are at higher risk of getting chemical burns since they have limited mobility and are prone to mishandling chemicals. At school, students who work with chemicals in science labs are also at risk of a chemical burn accident.

 

People who handle chemicals as part of their work are likewise at risk of getting chemical burns. This is particularly true for those who use chemicals to manufacture pharmaceutical products and other types of goods. This is also the case for those who use strong substances to provide a service to clients. Professions such as plumbers who use drain products and domestic cleaners who use disinfectant products. Workplaces where improper equipment, techniques, and storage methods can also expose employees to a chemical burn accident.

 

Get a Burn Injury Lawyer

If you have been involved in a chemical burn accident, especially one where you were not at fault, contact us here at McEwen Law Firm. We have a team of skillful and experienced burn injury attorneys. Our offices have handled numerous chemical burn cases and helped clients obtain the compensation they deserved. We will assist you in filing your claim and ensure you’ll get the compensation that you deserve!

 

One of the best things about hiring McEwen Law Firm is that we work on a contingency, so we will not charge you any fee until we win your case. This allows you to focus on getting better and regaining your health instead of worrying about legal fees. Give us a call today to learn more about our services and find out how we can help you!

 


Serving clients in the: Minnesota Area including Minneapolis, Minnesota, St Paul, Twin Cities, Bloomington, and throughout the United States. Hennepin County, Carver County, Wright County, Scott County, Dakota County, Anoka County, Washington County, and Ramsey County.